Pulmonary evaluation of whole-body inhalation exposure of polycarbonate (PC) filament 3D printer emissions in rats

Project Title:  View help for Project Title Pulmonary evaluation of whole-body inhalation exposure of polycarbonate (PC) filament 3D printer emissions in rats

Summary:  View help for Summary Additive manufacturing (AM) is a broad manufacturing term that encompasses a range of processes that create objects by adding material through a computer-aided design model.  Three-dimensional (3D) printing is a form of AM, which builds objects layer-by-layer deposition of feedstock material using a 3D printer machine and computer software.  Fused filament fabrication (FFF, also known as Filament Freeform Fabrication) is one 3D printing process in which filaments are melted and extruded from a heated nozzle to deposit material.  FFF is an emerging technology and one of the most popular additive manufacturing processes, especially for consumers and small manufacturers.  Polycarbonate (PC) is a versatile material and PC filaments are widely used for fused filament fabrication 3D printing.  PC filaments are often loaded with additives to achieve different properties of the print objects.  These additives range from dyes, organometallic compounds, carbon nanomaterials, nanometal oxides to micrometer-scale particles such as copper, bronze, steel, tungsten, gold, and aluminum nitride (Vance et al., 2017).   Several engineered nanomaterials were infused into PC filaments, such as silicon dioxide nanoparticles, titanium nitride nanoparticles (Vidakis et al., 2021), titanium carbide nanopowder (Vidakis et al., 2022a), aluminum nitride nanoparticles (Vidakis et al., 2022b), and carbon nanotubes (Potter et al., 2021).\n\nDuring heating, PC filament undergoes thermal degradation and releases fine particles (0.1 to 2.5 um) and incidental nanoparticles (d \u003c 100 nm) as well as numerous volatile, and semi-volatile organic compounds that are likely derived from PC polymer and additives in the polymer (Azimi et al., 2016; Byrley et al., 2020; Gu et al., 2019; Stefaniak et al., 2017; Stefaniak et al., 2019; Alijagic et al., 2022; Tedla et al., 2022).   These emissions could pose a potential hazard to human health.  Currently, the potential health hazard of PC filament printing emissions has not been determined.\n\nA NIOSH research group used a condensation nuclei counter to study PC filament emission rates, and determined that the number-based particle emission rates from an industrial-scale material extrusion AM machine were around 2.2 x1011 number/minute and the total volatile organic compound emission rates were around 1.9 x 104 µg/minute (Stefaniak et al., 2019).  The same group also found low levels of acetone, benzene, toluene, and m,p-xylene during PC filament printing processes.  Potter et al showed that PC filament emissions contained bisphenol A (BPA), phenol, chlorobenzene, DEHP, and di-tert-butylphenol (Potter et al., 2019).  In our previous studies on PC filament printer emission-induced cell toxicity (Farcas et al., 2019), emissions from a commercial PC 3D printer were generated in a chamber using a 3D printer and collected in cell culture medium.  The number-based size distribution of the particles inside the chamber was between 140-170 nm and the mean particle sizes in cell culture medium were 201±18 nm.  Analysis of elemental composition of particles collected in the cell culture medium found C, O, Ca, Na, Si, Ni, Cr, Fe, S, Al, and Cl.  The organic compounds in the emission collection cell culture medium were BPA, p-isopropenylphenol, and phenol.  At 24 h post-exposure, PC emissions were internalized in human small airway epithelial cells (SAEC) and induced a dose-dependent cytotoxicity, oxidative stress, apoptosis, necrosis, and increases in pro-inflammatory cytokine and chemokine production in SAEC (Farcas et al., 2019).  The results demonstrated that PC filament 3D printing emissions induce a cellular toxicity in SAEC.\n\nAlthough cell-based in vitro toxicity analysis is increasingly applied to screen and rank chemicals for prioritizing toxicity studies, as well as to study toxic mechanisms, the toxicological significance of in vitro study-generated data in hazard and risk assessment is limited.  In comparison with animal-based in vivo studies,  in vitro cell studies can lack tissue-specific differentiated functions, physiological context with other cells and  tissues, and biological concordance in metabolism of xenobiotic chemicals (Blaauboer, 2008).\n\nThis study sought to evaluate PC filament printer emission-induced pulmonary and systemic toxicity in rats.  A real-time 3D printer emission generation system was applied to simultaneously use three commercially available 3D PC filament printers to generate PC filament aerosols consisting of a mixture of particles and volatile organic compounds (VOCs) that were delivered to an animal exposure chamber.  Male Sprague-Dawley rats were exposed to 3D PC filament emissions in a time-course via whole body inhalation.  The rats were exposed to a single concentration (0.529 mg/m3 average, 40 nm mean diameter) of the emissions for 1, 4, 8, 15, and 30 days (4 h/day, 4 days/week), and were sacrificed at 24 h after the last exposure.  Bronchoalveolar lavage (BAL) samples were collected to analyze inflammatory, fibrotic, and oxidative stress responses.  Lung and nasal tissues underwent histopathological analysis to evaluate the emission-induced tissue damages.  Several blood biomarkers were tested for the emission-induced systemic toxicity in rats.

Original Distribution URL:  View help for Original Distribution URL https://data.cdc.gov/National-Institute-for-Occupational-Safety-and-Hea/Pulmonary-evaluation-of-whole-body-inhalation-expo/235m-gsry

Subject Terms:  View help for Subject Terms NIOSH-rescue